There are still many problems related to this product. For example:
How to use the hand cleat bender?
(1) Turn on the power of the equipment, then turn on the key switch on the control panel, and then press the oil pump to start, but note that at this time, the machine will not do any action.
(2) Adjust the stroke of the hand splint bending machine, and test before bending.
(3) When the upper die of the hand cleat bender goes down to the bottom, a plate thickness gap must be ensured to avoid damaging the machine equipment and die.
(4) Select a good bending notch, generally eight times the width of the notch.
(5) There are two ways to adjust the back stop: Electric quick adjustment and manual fine adjustment.
(6) Press the foot switch to let the hand splint bender start bending. If the foot is loosened, the hand splint bender will stop bending.