Angle making machine TDC also needs maintenance in the process of use, so that can extend the service life of the machine. It tends to be ignored by many angle making machine TDC manufacturers. MYT will introduce relevant knowledge to you.
What we should know is that the angle making machine TDC is mainly composed of coiler, feeding device, punch with continuous angle device, etc.
Circuit: pay attention to the cleaning of the circuit board, regularly clean the dust in the strong and weak electric boxes, keep the electric boxes dry, and prevent moisture.
Oil circuit: check all parts of the oil circuit for oil leakage and deal with it in time.
Mechanical: check the transmission part of the machine for wear, check whether each grease fitting is blocked, and inject grease.
Other precautions: It is recommended to replace the hydraulic oil once a year and clean up the oil sludge in the oil tank. The water cooler should be cleaned in time to prevent the oil temperature from rising and causing the accelerated aging of the oil quality. Of course, matter about the safety never be negligible. The circuit safety door switch, oil way pressure relief valve, mechanical safety stop, and the warning light of the machine must be checked for normal operation during maintenance.